ZyXEL VMG4927-B50A User Guide - Page 130

Chapter 9 Routing Figure 62 Network Setting > Routing > Static Route The following table describes the labels in this screen. Table 34 Network Setting > Routing > Static Route LABEL DESCRIPTION Add New Static Route # Status Name Destination IP Subnet Mask/ Prefix Length Gateway Interface Modify Click this to configure a new static route. This is the index number of the entry. This field displays whether the static route is active or not. A yellow bulb signifies that this route is active. A gray bulb signifies that this route is not active. This is the name that describes or identifies this route. This parameter specifies the IP network address of the final destination. Routing is always based on network number. This parameter specifies the IP network subnet mask of the final destination. This is the IP address of the gateway. The gateway is a router or switch on the same network segment as the device's LAN or WAN port. The gateway helps forward packets to their destinations. This is the WAN interface used for this static route. Click the Edit icon to edit the static route on the VMG. Click the Delete icon to remove a static route from the VMG. A window displays asking you to confirm that you want to delete the route. 9.2.1 Add/Edit Static Route Use this screen to add or edit a static route. Click Add New Static Route in the Routing screen or the Edit icon next to the static route you want to edit. The screen shown next appears. VMG4927-B50A / VMG9827-B50A User's Guide 130