ZyXEL VMG4927-B50A User Guide - Page 80
LABEL, DESCRIPTION, Enable, Disable
View all ZyXEL VMG4927-B50A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Chapter 6 Broadband Figure 30 Network Setting > Broadband > Add New WAN Interface/Edit (ADSL over ATM-Bridge Mode) The following table describes the fields in this screen. Table 13 Network Setting > Broadband > Add New WAN Interface/Edit (ADSL over ATM-Bridge Mode) LABEL DESCRIPTION General Active Select Enable or Disable to activate or deactivate the interface. Name Enter a service name of the connection. Type Select ADSL over ATM as the interface that you want to configure. The VMG uses the ADSL technology for data transmission over the DSL port. Mode Select Bridge when your ISP provides you more than one IP address and you want the connected computers to get individual IP address from ISP's DHCP server directly. If you select Bridge, you cannot use routing functions, such as QoS, Firewall, DHCP server and NAT on traffic from the selected LAN port(s). ATM PVC Configuration (These fields appear when the Type is set to ADSL over ATM.) VPI The valid range for the VPI is 0 to 255. Enter the VPI assigned to you. VCI The valid range for the VCI is 32 to 65535 (0 to 31 is reserved for local management of ATM traffic). Enter the VCI assigned to you. VMG4927-B50A / VMG9827-B50A User's Guide 80