ZyXEL VMG4927-B50A User Guide - Page 23
WPS Button
View all ZyXEL VMG4927-B50A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 1 VMG Introduction Figure 9 LEDs on the VMG9827-B50A 1.4.2 WPS Button Once the WiFi LED turns green, WiFi is active. If WiFi is turned off, see Section 7.2 on page 91 for how to enable WiFi on the VMG. You can also use the WPS button to quickly set up a secure WiFi connection between the VMG and a WPS-compatible client by adding one device at a time. To activate WPS: 1 Make sure the POWER LED is on and not blinking. 2 On the VMG, press the WPS button for more than five seconds and release it. 3 Press the WPS button on another WPS-enabled device within range of the VMG. The WiFi 2.4G and WiFi 5G LEDs flash amber while the VMG sets up a WPS connection with the other WiFi device. 4 Once the connection is successfully made, the WPS LED shines green. Note that it depends on your client's configuration to have a 2.4 GHz or 5 GHz WiFi network. Note: Your VMG supports both 2.4 GHz and 5 GHz wireless networks, the connection to the 5 GHz wireless network has priority. The WPS LED turns off when WiFi is off. VMG4927-B50A / VMG9827-B50A User's Guide 23