ZyXEL VMG4927-B50A User Guide - Page 185

Chapter 15 Interface Grouping Table 73 Interface Group Configuration (continued) LABEL DESCRIPTION Automatically Add Clients With the following DHCP Vendor IDs Click Add to identify LAN hosts to add to the interface group by criteria such as the type of the hardware or firmware. See Section 15.2.2 on page 185 for more information. # This shows the index number of the rule. Filter Criteria This shows the filtering criteria. The LAN interface on which the matched traffic is received will belong to this group automatically. WildCard Support This shows if wildcard on DHCP option 60 is enabled. Modify Click the Modify icon to edit this rule from the VMG. OK Click OK to save your changes back to the VMG. Cancel Click Cancel to exit this screen without saving. 15.2.2 Interface Grouping Criteria Click the Add button in the Interface Grouping Configuration screen to open the following screen. Figure 105 Interface Grouping Criteria The following table describes the fields in this screen. Table 74 Interface Grouping Criteria LABEL DESCRIPTION Source MAC Address Select this option and enter the source MAC address of the packet. DHCP Option 60 Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic, such as the type of the hardware or firmware. Enable wildcard Select this option to be able to use wildcards in the Vendor Class Identifier configured for DHCP option 60. DHCP Option 61 Select this and enter the device identity of the matched traffic. DHCP Option 125 Select this and enter vendor specific information of the matched traffic. VMG4927-B50A / VMG9827-B50A User's Guide 185