ZyXEL VMG4927-B50A User Guide - Page 26
Rear Panel
View all ZyXEL VMG4927-B50A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 1 VMG Introduction Table 3 VMG9827-B50A LED Descriptions LED COLOR STATUS DESCRIPTION Phone1, Phone2 Green On Blinking A SIP account is registered for the phone port, and there's no voice message in the corresponding SIP account. A telephone connected to the phone port has its receiver off of the hook or there is an incoming call. Amber On A SIP account is registered for the phone port and there is a voice message in the corresponding SIP account. Blinking A telephone connected to the phone port has its receiver off the hook and there is a voice message in the corresponding SIP account. Off The phone port does not have a SIP account registered. Red On Registration to the network has failed. Amber On WPS is enabled. WPS Off WPS is disabled. 1.4.4 Rear Panel The connection ports are located on the rear panel. The following graphics display the rear panels. Figure 10 VMG4927-B50A Rear Panel Figure 11 VMG9827-B50A Rear Panel The following table describes the items on the rear panels. Rear Panel Ports LABEL DESCRIPTION DSL Connect a RJ-11 cable to the DSL port for Internet access. See Section 1.1.1.1 on page 17 for more information about DSL bonding. ETHERNET 1 ~ Connect computers or other Ethernet devices to Ethernet ports for Internet access. 4 LAN/WAN Connect an Ethernet cable to the Ethernet WAN port for Internet access. See Section 1.1.1.2 on page 19 for more information about converting the LAN/WAN port as a WAN port. USB The USB port is reserved for future development. VMG4927-B50A / VMG9827-B50A User's Guide 26