2008 Acura TSX Owner's Manual - Page 135

Main Menu Table Of Contents Remote Transmitter To change the ''INTERIOR LIGHT DIMMING TIME,'' see page 106 . If you unlock the doors with the remote transmitter, but do not open any doors within 30 seconds, the doors automatically relock and the security system sets. To change this setting, refer to ''SECURITY RELOCK TIMER'' on page 115 . PANIC Press this button for about 1 second to attract attention; the horn will sound and the exterior lights will flash for about 30 seconds. To cancel panic mode, press any other button on the remote transmitter, or turn the ignition switch to the ON (II) position. Press this button for TRUNK about 1 second to open the trunk. You cannot open the trunk if the key is in the ignition switch. Linking Your Remote Transmitter 1. Standing outside the vehicle with all the doors shut, push the lock and unlock buttons at the same time until the LED on the remote transmitter blinks 2 times. 2. Open and shut the driver's door. 3. Use the remote transmitter to lock and unlock the driver's door. 4. Verify that the remote transmitter is in the linked mode. Turn the ignition switch to the ON (II) position. The MID display should read ''Welcome Driver 1'' or ''Welcome Driver 2'', depending on which remote you just linked (the remote number is on the back of the remote transmitter). If the MID display only reads ''Welcome Driver'' once the ignition switch is turned to the ON (II) position, the link from the remote transmitter to the vehicle has failed. Repeat the procedure. If the link still fails, see your dealer. Recalling a Memorized Driving Position DRIVER 1 REMOTE DRIVER 2 REMOTE Each remote transmitter also activates the Driving Position Memory System and changes the ''MEMORY POSITION LINK'' setting according to that remote (see page 143 ). 132 2008 TSX