2008 Acura TSX Owner's Manual - Page 147

Main Menu Table Of Contents Driving Position Memory System Doing any of the following after pressing the MEMO button will cancel the storing procedure. Not pressing a memory button within 5 seconds. Pressing the MEMO button again within 5 seconds. Readjusting the seat position. Each memory button stores only one driving position. Storing a new position erases the previous setting stored in that button's memory. If you want to add a new position while retaining the current one, use the other memory button. All stored driving positions will be lost if your vehicle's battery goes dead or is disconnected. MEMORY BUTTONS Selecting a Memorized Position The system will move the driver's seat to the memorized position. The indicator in the selected memory button will flash during movement. When the adjustment is complete, you will hear two beeps, and the indicator will stay on. Notes for vehicles with M/T You cannot select a memorized position if the transmission is in reverse. Shift to another gear, then select a position. If the parking brake is not set, you must press and hold the memory button until the adjustment is complete. To select a memorized position, do this: 1. Make sure the parking brake is set (M/T) or the shift lever is in Park (A/T). 2. Press the desired memory button (1 or 2) until you hear a beep. 144 2008 TSX