2008 Acura TSX Owner's Manual - Page 151

Main Menu Table Of Contents Power Windows AUTO REVERSE If the driver's window senses any obstacle while it is closing automatically, it will reverse direction, and then stop. To close the window, remove the obstacle, then use the window switch again. Auto reverse stops sensing when the window is almost closed. You should always check that all passengers and objects are away from the window before closing it. If your vehicle's battery is disconnected or goes dead, or the driver's window fuse is removed, the AUTO function may be disabled. If this happens, the power window system will need to be reset after reconnecting the battery or installing the fuse. 1. Start the engine. Push down and hold the driver's window switch until the window is fully open. 2. Pull and hold the driver's window switch to close the window completely, then hold the switch for about 2 seconds. If the power windows do not operate properly after resetting, have your vehicle checked by your dealer. The power window system has a keyoff delay function. The windows will still operate for up to 10 minutes after you turn off the ignition switch. Opening either front door cancels the delay function. You must turn the ignition switch to the ON (II) position again before you can raise or lower the windows. 148 2008 TSX