2008 Acura TSX Owner's Manual - Page 329
2008 Acura TSX Manual
Page 329 highlights
Main Menu Table Of Contents Changing a Flat Tire EXTENSION TOOL TRAY JACKING POINT WHEEL NUT WRENCH 3. Open the trunk. Raise the trunk floor by lifting up on the back edge. 4. Take the tool tray out of the trunk, and remove the tools and the jack. 5. Unscrew the wing bolt and take the spare tire out of the trunk. 6. Loosen each wheel nut 1/2 turn with the wheel nut wrench. 7. Place the jack under the jacking point nearest the tire you need to change. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. 8. Use the extension and the wheel nut wrench as shown to raise the vehicle until the flat tire is off the ground. 9. Remove the wheel nuts and flat tire. Handle the wheel nuts carefully; they may be hot from driving. Place the flat tire on the ground with the outside surface of the wheel facing up. 326 2008 TSX