2008 Acura TSX Owner's Manual - Page 136

Main Menu Table Of Contents Remote Transmitter When you open the driver's door after unlocking it with the remote transmitter, you will hear a beep (depending on the ''KEYLESS LOCK ACKNOWLEDGEMENT'' setting see page 113 ). The driver's seat will move to the positions stored in the memory location corresponding to the remote in use. You will hear two beeps when the seat stops moving. Any of these actions will stop the system's automatic seat adjustment: Pressing either memory button or the MEMO button on the driver's door. Pressing any of the seat adjustment switches. Shifting out of Park (A/T), or into reverse (M/T). CONTINUED The driving position memory activated (Driver 1, Driver 2) is shown on the back of each transmitter. Make sure you store your desired driving position in the memory that is activated by the transmitter you normally carry. You can turn off this system activation. Press and hold the LOCK and UNLOCK buttons at the same time. The LED in the remote transmitter will blink twice. Then release the buttons. Doing this also cancels the ''MEMORY POSITION LINK'' setting for that remote and restores the default settings. To turn it back on, repeat this procedure. The LED will come on for 1 second to indicate the feature has been turned on. Remote Transmitter Care Avoid dropping or throwing the transmitter. Protect the transmitter from extreme temperature. Do not immerse the transmitter in any liquid. If you lose a transmitter, the replacement needs to be reprogrammed by your dealer. Replacing the Transmitter Battery Instruments and Controls If it takes several pushes on the button to lock or unlock the doors, replace the battery as soon as possible. Battery type: CR2025 2008 TSX 133