2008 Acura TSX Owner's Manual - Page 74

Main Menu Table Of Contents Multi-Information Display The primary display always shows its default setting, ''INST. MPG'' (U.S. models) or ''INST. L/100 km'' (Canadian models) even if you press the INFO button. It only changes the secondary display. You can customize this setting to your liking (see page 102 ). Messages in the trip computer include: INST. MPG (U.S. models)/ INST.L/100 km (Canadian models): Your vehicle's current fuel mileage. AVG. FUEL A/AVG. FUEL B: Your vehicle's average fuel economy since you last reset the Trip A or Trip B. When you select Trip B in the lower segment by pressing the SEL/RESET button on the steering wheel or select/ reset knob in the instrument panel, the AVG. FUEL B appears in the secondary display. RANGE: The estimated distance you can travel on the fuel remaining in the tank. This distance is estimated from the fuel economy you received over the last several miles, so it will vary with changes in speed, traffic, etc. ELAPSED TIME: The time traveled since you last reset the trip computer. When you turn the ignition switch to the ON (II) position, ELAPSED TIME is reset. AVG. SPEED: The average speed you are traveling. TIRE PRESSURE MONITOR: You can see the pressure of each tire in this monitor. If the tire pressure is low on one or more tires, inflate them to the correct pressure. For more information, see page 264 . CONTINUED Instruments and Controls INFO KNOB INFO BUTTON The upper segment is divided into two displays; primary and secondary. After you turn the ignition switch to the ON (II) position, press the INFO button on the steering wheel or the INFO knob in the instrument panel. What you last selected appears on the secondary display of the trip computer. Pressing the INFO button/knob repeatedly changes the display as shown in the example on the previous page. 2008 TSX 71