2008 Acura TSX Owner's Manual - Page 309

Main Menu Table Of Contents Lights 6. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. 7. Turn on the lights to test the new bulb. 8. Put the inner fender cover in place. Install and lock each holding clip by pushing on the center. BULB COVER SOCKET Replacing Rear Bulbs (In Fenders) 1. Open the trunk. 2. Remove the light assembly cover by pulling its outside edge. 3. Remove the socket by turning it one-quarter turn counterclockwise, and pull the bulb straight out of its socket. 4. Push a new bulb straight into the socket until it bottoms, and reinstall the socket into the light assembly by turning it clockwise until it locks. 5. Test the new bulb to make sure it works. 6. Reinstall the light assembly cover. 306 2008 TSX