2008 Acura TSX Owner's Manual - Page 296
2008 Acura TSX Manual
Page 296 highlights
Main Menu Table Of Contents Changing the Engine Oil and Filter Always change the oil and filter according to the maintenance messages shown on the multiinformation display. The oil and filter collect contaminants that can damage your engine if they are not removed regularly. Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service stationtype hydraulic lift for this service. Unless you have the knowledge and proper equipment, you should have this maintenance done by a skilled technician. BOLT MAINTENANCE COVER WASHER OIL DRAIN BOLT 1. Run the engine until it reaches normal operating temperature, then shut it off. 2. Open the hood and remove the engine oil fill cap. 3. Remove the bolt located on the underside of the body with a wrench, then remove the maintenance cover. 4. Remove the oil drain bolt and washer from the bottom of the engine. Drain the oil into an appropriate container. 5. Remove the oil filter and let the remaining oil drain. A special wrench (available from your dealer) is required. Maintenance CONTINUED 2008 TSX 293