2008 Acura TSX Owner's Manual - Page 210

Main Menu Table Of Contents Cruise Control Cruise control may not hold the set speed when you are going up and down hills. If your speed increases going down a hill, use the brakes to slow down. This will cancel cruise control. To resume the set speed, press the RES/ACCEL button. The ''CRUISE CONTROL'' message on the multi-information display will come back on. Changing the Set Speed You can increase the set cruising speed in any of these ways: Press and hold the RES/ACCEL button. When you reach the desired cruising speed, release the button. Push on the accelerator pedal. Accelerate to the desired cruising speed and press the SET/DECEL button. To increase the speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, your vehicle will speed up about 1 mph (1.6 km/h). You can decrease the set cruising speed in any of these ways: Press and hold the SET/DECEL button. Release the button when you reach the desired speed. To slow down in very small amounts, tap the SET/DECEL button repeatedly. Each time you do this, your vehicle will slow down about 1 mph (1.6 km/h). Tap the brake or clutch pedal lightly with your foot. The ''CRUISE CONTROL'' message on the multi-information display goes out. When the vehicle slows to the desired speed, press the SET/ DECEL button. Features Even with cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set cruising speed. Resting your foot on the brake or clutch pedal causes cruise control to cancel. 2008 TSX 207