2008 Acura TSX Owner's Manual - Page 202

Main Menu Table Of Contents Playing a Tape (Optional) To Play a Tape The ignition switch must be in the ACCESSORY (I) or ON (II) position. Make sure the open side of the tape is facing right, then insert the tape most of the way into the slot. The system will pull the tape in the rest of the way, and begin to play it. The tape direction indicator will light to show you which side of the tape is playing. The indicates the side you inserted upward is now playing. If you want to play the other side, press the Preset 3 (PLAY/PROG) or press the AUDIO button and touch either or icon. When the player reaches the end of the tape, it will automatically reverse direction and play the other side. Dolby noise reduction turns on when you insert a tape. The indicator will light in the display. If the tape was not recorded in Dolby, turn it off by pressing the Preset 4 (NR) or touching the NR icon. Dolby remains off until you press the preset button or the icon again. Dolby noise reduction manufactured under license from Dolby laboratories licensing Corporation. ''Dolby'' and the double-D symbol are trademarks of the Dolby Laboratories Licensing Corporation. To Stop Playing a Tape If you turn the system off while a tape is playing, either with the VOL/ PWR knob or by turning off the ignition, the cassette will remain in the drive. When you turn the system back on, the tape will begin playing where it left off. To switch to the radio or CD player while a tape is playing, press the AM/FM, or CD/AUX button or CD/ AUX XM button. To change back to the tape player, push the CD/AUX button or CD/AUX XM button. Features 2008 TSX 199