1994 Chevrolet Corvette Owner's Manual - Page 103
1994 Chevrolet Corvette Manual
Page 103 highlights
Features and Controls I 5. Using the wrench, remove the two lower bolts (A) from the lock pillar bracket on each side. 6. Remove the bolt (B) from the bottom flange of each lock pillar bracket. 7. Then remove the two upper bolts (C) from the receiver bracket on each side Slide both lock pillar brackets down and forward from the receiver brackets. You may need to lift the hardtop slightly to remove the brackets. Disconnect both wire connectors behind the lockpillar brackets. These are the rear window defogger wires. 10. With one person on each side, gently lift the hardtop about eight inches (200 mm) straight up. Remove the hardtop over the rear the vehicle. of NOTICE: To help avoid damaging the hardtop when not in use: Store the hardtop in its normal position, resting on its mounting brackets. Store hardware and trim panel with the hardtop. 11. Connect the rear window defogger electrical connectorsto the convertible top rear window. Make sure they are inside the vehicle. . .I02