1994 Chevrolet Corvette Owner's Manual - Page 187

Service and Appearance Care ;ake muchfluid, generally less than a pint. Don't overfill. We recommend you use mly fluid labeled DEXRON@-111 or DEXRON@-IIE, because fluids with that label are made especially for your automatic transmission. Dama e caused D1 1 by fluid other than DEXRON - 1 or DEXRON@-IIE is not covered by your new vehicle warranty. 0 After adding fluid, recheck the fluid level as described under "How to Check." 0 When the correct fluid level is obtained, push the dipstick back in all the way. NOTICE: Too much or too little fluid can damage your transmission. Too much can mean that someof the fluid could come out andfall on hot engine parts or exhaust system, starting a fire. Be sure to get an accurate reading if you check your transmissionfluid. :heck the fluid level only when your mgine is off, the vehicle is parked on a eve1 place and the transmission cool is :nough for you to rest yourfingers on he transmission case. Manual Transmission Fluid How to Check: Because this operation can be difficult, you may choose to have this done at a Chevrolet dealership Service Department. If you do it yourself, be sure to follow all the instructions here, or you could get a false reading. Then, follow these steps: 1. Remove the filler plug. 2. Check that the lubricant level is up to the bottom of the filler plug hole. 3. If the fluid level isgood, install the plug and be sure it fully seated. If is the fluid levelis low, add more fluid as described in the next steps. How to Add Fluid: Here's how to add fluid. Refer to the Maintenance Schedule to determine what kind of fluid to use. See "Recommended Fluids and Lubricants" the Index. in 1. Remove the filler plug. ...I 8 6