1994 Chevrolet Corvette Owner's Manual - Page 104

T Install Your Convertible Hardtop O 1. Park on a level surface,set the parkinl \ Q \ \ brake firmly and shift automatic an transmission into "F'" (Park). Shift a manual transmission into "R' (Reverse). Lower both windows and sunshades. T r off the radio to lower un the power antenna and turn the ignition key to"LOCK." 2. Disconnect both rear window defogger electrical connectors behind lock the pillar. i. Move both seatbacks forward. Slide 7. Insert the two upper bolts (C),into 3. Lower the convertible top.Refer to the lock pillar bracket into the receiver both receiver brackets. You k a y have "Convertible Top" in the Index. bracket until the scribed line is even to lift the hardtop slightly to install the with the lower edge of the receiver lock pillar bracket. 4. With one person on each side, bracket. carefully position the hardtop over 8. If the hardtop hasn't lowered into the vehicle. Lower the hardtop slowly. i. Connect the electrical connectors to position, pull the release lever-behind aligning the rear bolt spacers onto the the driver's seat underthe storage the hardtop rear window. Make sure bezels, and front conicalnuts into the compartment lid. they are inside the vehicle. tapered receivers. Realign the hardtop if necessary. NOTICE: To help avoid damage, don'tforce the rearof the hardtop down. The hardtop may rest slightly above the $foragecompartment lid until the release leveris pulled. See step 8 in this procedure. 103 ...