1998 Chevrolet Venture Owner's Manual - Page 233

While the tape is playing, use the VOL, FADE, BAL, BASS and TREB controlsjust asyou do for the radio. Other controlsmay have different functions when a tape is inserted. The display will showan arrow to show which side of the tapeis playing. CD Adapter Kits It is possible to useCD a adapter kit with your cassette tape player after activating the bypass feature on your tape player. To activate the bypass feature, use the following steps: 1. Turn the ignition to RUN or ACCESSORY. REV: Press the SEEK arrow pointing to the left and the tapewill reverse rapidly until you press this button again lightly. FWD: Press theSEEK arrow pointing tothe right and the tape will rapidly advance until you press this button again lightly. RECALL: Press this knob to hear the other side of a tape that is playing. EJECT: Press this button to remove the tape. The radio will play. If you leave a cassette tape in the player while listening to the radio, may it become warm. CLN: If this messageappears on the display, the cassette tape player needs be to cleaned. It will still play tapes, butyou should clean it as soon as possible to prevent damage to the tapes and player. See "Care of Your Cassette Tape Player" in the Index. After you clean the player, press and hold EJECT for five seconds to reset the CLN indicator. The radio will display --- to show the indicator was reset. 2. Turn the radio on. 3. Insert the adapter. 4. Within five seconds, press and hold the REV and FWD buttons at the same time for three seconds.The tape symbol on the display will flash, showing that the cut tape detection feature is no longer active. This override routine will remain active until EJECT is pressed. 3-14