1998 Chevrolet Venture Owner's Manual - Page 370

5. Replace the bulbby pulling the oldone out and gently pushing the new one into the lamp socket. 6. Line up the tabs on the sockets with the gaps in the socket holes and screw the bulb socket backinto the lamp housing until an audible click is heard (thetab popping back out). 7. To replace the lamp assembly, line up and insertthe tabs on the back of the assembly with the slots in the fender. Engage the lower clip on the front of the lamp assembly, keeping the upper tab on the parking/turn signallamp assembly inboardof the headlamp bracket tab. 8. To align the parking/turn signal lamp assembly with t headlamp assembly, lift up the parking/turn signal lam assembly until the upper edge is contacting the fender. lamp assembly to the 9. Fasten the parking/tum signal headlamp assembly with the thumb screw removed in Step 1. 6-35 K -_