2010 Chrysler 300 Owner Manual SRT8 - Page 138
2010 Chrysler 300 Manual
Page 138 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 1. Adjust all memory profile settings to desired prefer- Linking and Unlinking the Remote Keyless Entry ences (i.e., seat, side mirror, adjustable pedals, power tilt, Transmitter to Memory Your RKE transmitters can be programmed to recall one telescopic steering column, and radio station presets). of two pre-programmed memory profiles by pressing the 2. Press and release the SET button on the Memory UNLOCK button on the RKE transmitter. switch, then press the side of the rocker switch labeled (2) within five seconds. The EVIC will display which To program your RKE transmitters, perform the following: memory position is being set. 1. Remove the Key Fob from the ignition (or change the NOTE: • Memory profiles can be set without the vehicle in ignition to OFF, for vehicles equipped with Keyless PARK, but the vehicle must be in PARK to recall a Go™). memory profile. 2. Select the desired memory profile 1 or 2. • The Recall Memory with Remote Key Unlock feature 3. Press and release the SET button on the Memory can be enabled or disabled. For details, refer to "Elecswitch, then press and release the side of the rocker tronic Vehicle Information Center (EVIC)/Customerswitch labeled 1 or 2 accordingly. ЉMemory Profile Set" (1 Programmable Features" in "Understanding Your Inor 2) will display in the EVIC. strument Panel" for further information. 4. Press and release the LOCK button on the RKE transmitter within 10 seconds. 3