2010 Chrysler 300 Owner Manual SRT8 - Page 351
2010 Chrysler 300 Manual
Page 351 highlights
350 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • TIREFIT Sealant solution contains latex. In case of allergic reaction or rash, consult a physician immediately. Keep TIREFIT out of reach of children. If swallowed, rinse mouth immediately with plenty of water and drink plenty of water. Do not induce vomiting! Consult a physician immediately. • Use the gloves provided in the Accessory Storage Compartment (located on the bottom of the air pump) when operating the TIREFIT kit. Sealing a Tire with TIREFIT (A) Whenever You Stop to Use TIREFIT: 2. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the ground. This will allow the TIREFIT Hoses (6) and (7) to reach the valve stem and keep the TIREFIT kit flat on the ground. This will provide the best positioning of the kit when injecting the sealant into the deflated tire and running the air pump. Move the vehicle as necessary to place the valve stem in this position before proceeding. 3. Place the transmission in PARK (auto transmission) or in Gear (manual transmission) and turn OFF the ignition. 4. Set the parking brake. (B) Setting Up to Use TIREFIT: 1. Remove the gloves from the Accessory Storage Compartment (located on the bottom of the air pump) and 1. Pull over to a safe location and turn ON the vehicle's place them on your hands. Hazard Warning flashers. 2. Turn the Mode Select Knob (5) to the Sealant Mode position.