2010 Chrysler 300 Owner Manual SRT8 - Page 192
2010 Chrysler 300 Manual
Page 192 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 191 If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not turn on when the ignition switch placed in the RUN position, have the light inspected by an authorized dealer. vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see an authorized dealer as soon as possible to have the problem diagnosed and corrected. WARNING! If a warning light remains on the system may not be working and you will not have the benefit of ESP or BAS. Under certain driving conditions, where ESP or BAS would be beneficial, you - if you have not adjusted your driving speeds and stopping in or to account for the lack of the feature, may be in accident. 4 10. Electronic Stability Program (ESP) / Brake Assist System (BAS) Malfunction Indicator Light The yellow Electronic Stability Program (ESP) / Brake Assist System (BAS) Malfunction Indi11. Airbag Warning Light cator Light will turn on when the key in the This light will turn on for six to eight seconds ignition switch placed in the RUN position. as a bulb check when the ignition switch is first The light should go out with the engine running. If the placed in the RUN position. If the light is either light remains on after several ignition cycles, and the not on during starting, or stays on, or turns on