2010 Chrysler 300 Owner Manual SRT8 - Page 82
2010 Chrysler 300 Manual
Page 82 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Defroster Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to Seat Belts feel the air directed against the windshield. See your Inspect the belt system periodically, checking for cuts, authorized dealer for service if your defroster is frays, and loose parts. Damaged parts must be replaced inoperable. immediately. Do not disassemble or modify the system. Floor Mat Safety Information Front seat belt assemblies must be replaced after a Always use floor mats designed to fit the foot well of collision. Rear seat belt assemblies must be replaced after your vehicle. Use only floor mats that leave the pedal a collision if they have been damaged (i.e., bent retractor, area unobstructed and that are firmly secured so that torn webbing, etc.). If there is any question regarding belt they cannot slip out of position and interfere with the or retractor condition, replace the belt. pedals or impair safe operation of your vehicle in other Airbag Warning Light ways. The light should come on and remain on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized dealer. If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Safety Checks You Should Make Inside the Vehicle 2