2010 Chrysler 300 Owner Manual SRT8 - Page 31

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. The doors were not previously locked using the power 2. Cycle the ignition switch between OFF and RUN and door lock switch or Remote Keyless Entry (RKE) then back to OFF four times ending up in the OFF position (do not start engine). transmitter. 3. Press the power door LOCK switch to lock the doors. Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or 4. A single chime will indicate the completion of the disabled as follows: programming. • For vehicles equipped with the Electronic Vehicle 5. Cycle the ignition after performing steps one to four Information Center (EVIC), refer to "Electronic Vehicle for the feature to be enabled or disabled. Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understand- 6. Repeat these steps if you want to return this feature to its previous setting. ing Your Instrument Panel" for further information. • For vehicles not equipped with the EVIC, perform the NOTE: Use the Automatic Door Locks feature in accorfollowing procedure: dance with local laws. 1. Close all doors and place the Key Fob in the ignition Automatic Unlock Doors on Exit The doors will unlock automatically on vehicles with switch. power door locks if: