2010 Chrysler 300 Owner Manual SRT8 - Page 51

50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Slide the latch plate upward over the folded webbing. How To Engage The Automatic Locking Mode The folded webbing must enter the slot at the top of the 1. Buckle the combination lap and shoulder belt. latch plate. 2. Grasp the shoulder portion and pull downward until 4. Continue to slide the latch plate up until it clears the the entire belt is extracted. folded webbing. 3. Allow the belt to retract. As the belt retracts, you will Automatic Locking Retractors (ALR) Mode - If hear a clicking sound. This indicates the safety belt is Equipped now in the Automatic Locking Mode. In this mode, the shoulder belt is automatically prelocked. The belt will still retract to remove any slack in How To Disengage The Automatic Locking Mode the shoulder belt. The Automatic Locking Mode is avail- Unbuckle the combination lap/shoulder belt and allow it able on all passenger-seating positions with a combina- to retract completely to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency) tion lap/shoulder belt. locking mode. When To Use The Automatic Locking Mode Use the Automatic Locking Mode anytime a child safety Seat Belt Pretensioners - If Equipped seat is installed in a seating position that has a belt with The seat belts for both front seating positions may be this feature. Children 12 years old and younger should equipped with pretensioning devices that are designed to always be properly restrained in the rear seat. remove slack from the seat belt in the event of a collision. These devices improve the performance of the seat belt