2010 Chrysler Sebring Owner Manual Convertible - Page 176
2010 Chrysler Sebring Manual
Page 176 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 175 release the Menu button. To reset the oil change indicator • Elapsed Time system (after performing the scheduled maintenance) • Display Units of Measure in perform the following procedure: Press and release the STEP button to advance the display 1. Turn the ignition switch to the ON position (Do not through the Trip Functions. start the engine). The Trip Functions mode displays the following informa2. Fully depress the accelerator pedal slowly three times tion: within 10 seconds. • Average Fuel Economy 3. Turn the ignition switch to the LOCK position. Shows the average fuel economy since the last reset. NOTE: If the indicator message illuminates when you When the fuel economy is reset, the display will read, start the vehicle, the oil change indicator system did not RESET or show dashes for two seconds. Then, the history information will be erased, and the averaging will conreset. If necessary repeat this procedure. tinue from the last fuel average reading before the reset. Trip Functions Press and release the MENU button until one of the • Distance To Empty (DTE) following Trip Functions displays in the EVIC: Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is • Average Fuel Economy determined by a weighted average of the instantaneous • Distance To Empty 4