2010 Chrysler Sebring Owner Manual Convertible - Page 237

236 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Blower Control • The temperature setting can be adjusted at anytime For full automatic operation or for without affecting automatic operation. automatic blower operation turn the knob to AUTO position. In manual • Pressing the Air Conditioning Control button while in mode there are seven blower speeds AUTO mode will cause the LED in the control button that can be individual selected. In off to flash three times and then turn off. This indicates position the blower will shut off. that the system is in AUTO mode and requesting the Manual Operation This system offers a full complement of manual override features, which consist of Blower Preferred Automatic, Mode Preferred Automatic, or Blower and Mode Preferred Automatic. This means the operator can override the blower, the mode, or both. There is a manual blower range for times when the AUTO setting is not desired. The blower can be set to any fixed blower speed by • While operating in AUTO, the system will not auto- rotating the Blower Control knob (on the left). matically sense the presence of fog, mist or ice on the windshield. The defrost mode must be manually se- NOTE: Please read the Automatic Temperature Control Operation Chart that follows for details. lected to clear the windshield and side glass. • If your air conditioning performance seems lower than expected, check the front of the A/C condenser located in front of the radiator for an accumulation of dirt or insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front fascia protectors may reduce airflow to the condenser, reducing air conditioning performance. air conditioning is not necessary.