2010 Chrysler Sebring Owner Manual Convertible - Page 178

UNDERSTANDING YOUR INSTRUMENT PANEL 177 NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated temperature is displayed. Engine temperature can also affect the displayed temperature, therefore temperature readings are not updated when the vehicle is not moving. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to calibrate the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will flash the CAL indicator until the compass is calibrated. You may calibrate the compass by completing one or more 360° turns (in an area free from large metal or metallic objects) until the CAL indicator in the EVIC turns off. The compass will now function normally. Manual Compass Calibration If the compass appears erratic, inaccurate, or abnormal, you may wish to calibrate the compass manually. However, prior to calibrating the compass, make sure the proper Compass Variance value is selected (Refer to "Compass Variance" for additional information). Then continue to calibrate the compass as follows: 1. Start the engine. Leave the shift lever in PARK in order to enter the EVIC Programming Menus. 2. Press and release the MENU Button until "Personal Settings" displays in the EVIC. 3. Press and release the STEP button until "Calibrate Compass Yes" displays in the EVIC. 4. Press and release the RESET Button and the CAL indicator will quit flashing. 4