2010 Chrysler Sebring Owner Manual Convertible - Page 76
2010 Chrysler Sebring Manual
Page 76 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 In the rear seat, you may have trouble tightening the 2. Open the access port cover (A) behind the seat where lap/shoulder belt on the child restraint because the you are placing the child restraint. buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out. If the belt still can't be tightened, or if pulling and pushing on the restraint loosens the belt, you may need to do something more. Disconnect the latch plate from the buckle, turn the buckle around, and insert the latch plate into the buckle again. If you still can't make the child restraint secure, try a different seating position. To attach a child restraint tether strap: 1. If lowered, raise the convertible top. Child Tether Access Port Cover 2 3. Push the tether strap and hook (B) through the access port and down into the trunk. NOTE: The convertible top must be in the UP position NOTE: Route the tether strap to provide the most direct to access the tether anchor. path from the child seat to the anchor.