2010 Chrysler Sebring Owner Manual Convertible - Page 366
2010 Chrysler Sebring Manual
Page 366 highlights
MAINTAINING YOUR VEHICLE 365 concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Make sure that they are not frozen to the glass before turning them on to avoid damaging the The external lock cylinders should be lubricated twice a blade. year, preferably in the Fall and Spring. Apply a small amount of a high quality lubricant such as MOPAR Keep the blade rubber out of contact with petroleum Lock Cylinder Lubricant or equivalent directly into the products such as engine oil, gasoline, etc. lock cylinder. NOTE: Life expectancy of wiper blades varies dependWindshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild non-abrasive cleaner or use the washer solvent. This will remove accumulations of salt, waxes, or road film and help reduce streaking and smearing. ing on geographical area and frequency of use. Poor performance of blades may be present with chattering, marks, water lines or wet spots. If any condition is present please proceed to clean wiper blades with humid cloth removing any debris that may be affecting its function. 7