2014 Ducati Hypermotard Hyperstrada Owners Manual - Page 103

Clock setting function (CLOCK) This function allows setting the clock. To display this function, access the Setting Menu and select the "CLOCK" page. To access the setting page, keep button (4) pressed for 3 seconds. After this time, the "SETTING..." indicator will be enabled to confirm that the setting page is active. On entering this mode, the message "AM" will flash; if you press button (2) "PM" flashes; if you press button (2) you will return to the previous step (if it is 00:00, when switching between "AM" to "PM", 12:00 will be displayed);. - each time you press button (2), the count will increase cyclically in steps of one minute; if you hold button (2) pressed, the count will increase cyclically in steps of 1 minute every second. If button (2) is held depressed for over 5 seconds, minutes will increase by 1 minute every 100 ms (while button (2) is held depressed, seconds will not flash). To confirm (store) the new time setting, press button (4). The "EXIT" indicator will be automatically highlighted; press button (4) to quit this page and go back to the setting menu. Pressing button (4) gives access to the hour setting mode; hours start to flash; each time you press button (2), the count will increase cyclically in steps of one hour; if button (2) is held pressed, the count will increase cyclically in steps of one hour every second (when the button is held depressed, the hours do not flash). Note If the battery is cutoff, when the voltage is restored and at the next Key-On, the clock must be reset (it starts automatically from 00:00). Pressing button (4) gives access to the minutes setting mode; minutes start to flash; 101