2014 Ducati Hypermotard Hyperstrada Owners Manual - Page 142
2014 Ducati Hypermotard Hyperstrada Manual
Page 142 highlights
The adjuster (2) on the lever allows a maximum adjustment (Q) of 0.43 in (11 mm), while the standard adjustment (the initial one) is 0.2 in (5 mm). If the adjustment is not enough, work on the secondary adjuster (3). 2 Q Attention In presence of clutch slipping, due to wearing, the adjuster (2) on the lever MUST NEVER be loosened but tightened, as explained above. If the slipping remains, go to a Ducati Dealer or Authorized Service Center. Fig 82 3 Fig 83 140
The adjuster (2) on the lever allows a maximum
adjustment (Q) of 0.43 in (11 mm), while the standard
adjustment (the initial one) is 0.2 in (5 mm). If the
adjustment is not enough, work on the secondary
adjuster (3).
Attention
In presence of clutch slipping, due to wearing,
the adjuster (2) on the lever MUST NEVER be
loosened but tightened, as explained above.
If the slipping remains, go to a Ducati Dealer or
Authorized Service Center.
2
Q
Fig 82
3
Fig 83
140