2014 Ducati Hypermotard Hyperstrada Owners Manual - Page 191
2014 Ducati Hypermotard Hyperstrada Manual
Page 191 highlights
Check drive chain tension Important Have chain tension adjusted by a Ducati Dealer or Authorized Service Center. Turn the rear wheel until you find the position where chain is tightest. Set the vehicle on the side stand. With just a finger, push down the chain at the point of measurement and release. Measure the distance (A) between the center of the chain pins and the aluminum section of the swingarm. It must be: A = 2.32 ÷ 2.40 in (59 ÷ 61 mm) / Low Seat (A) = 2.24 ÷ 2.32 in (57 ÷ 59 mm). Important If the drive chain is too tight or too slack, adjust it so that tension reading will fall within specified range. = A = 59÷61 mm 2.32÷2.40 in (Sella Bassa) 57 ÷ 59 mm / 2.24 ÷2.32 in Fig 143 189
Check drive chain tension
Important
Have chain tension adjusted by a Ducati Dealer
or Authorized Service Center.
Turn the rear wheel until you find the position where
chain is tightest. Set the vehicle on the side stand.
With just a finger, push down the chain at the point
of measurement and release. Measure the distance
(A) between the center of the chain pins and the
aluminum section of the swingarm. It must be: A =
2.32 ÷ 2.40 in (59 ÷ 61 mm) / Low Seat (A) = 2.24 ÷
2.32 in (57 ÷ 59 mm).
Important
If the drive chain is too tight or too slack, adjust
it so that tension reading will fall within specified
range.
=
=
59÷61 mm
2.32÷2.40 in
(Sella Bassa) 57 ÷ 59 mm / 2.24 ÷2.32 in
A
Fig 143
189