2014 Ducati Hypermotard Hyperstrada Owners Manual - Page 219

Performance data Maximum speed in any gear should be reached only after a correct running-in period with the motorcycle properly serviced at the recommended intervals. Attention Vehicle is compatible only with fuels with a max. ethanol content of 10% (E10). Using fuel with ethanol content over 10% is forbidden. Using it could result in severe damage to the engine and motorcycle components. Using fuel with ethanol content over 10% will make the warranty null and void. Important Failure to follow these instructions will release Ducati Motor Holding S.p.A. from any liability for any engine damage or shortened engine life. Brakes Separate-action anti-lock brake system operated by hall-type sensors mounted to each wheel with phonic wheel detection: ABS can be disabled. FRONT Semi-floating drilled twin-disc. Braking material: steel. Carrier material: black steel. Disc diameter: 12.60 in (320 mm). Hydraulically operated by a control lever on handlebar right-hand side. Brake caliper make: BREMBO. Type: M4.3 pistons. Friction material: TT 2182 FF. Master cylinder type: PS 16/22. REAR With fixed drilled steel disc. 217 Spark plugs Make: NGK Type: MAR9A-J Fuel system MARELLI indirect electronic injection. Throttle body with full Ride-by-Wire with circular section diameter of 2.04 in (52 mm). Injectors per cylinder: 1. Firing points per injector: 4. Fuel with a minimum octane rating of 90 (RON +MON)/2.