2014 Ducati Hypermotard Hyperstrada Owners Manual - Page 83

ABS set up This Function allows customization of the ABS (Antilock Braking System) level as well as its disabling. To display this function, access the Setting Menu and select the R.MODE page. Use buttons (1) and (2) to select the riding mode you wish to edit, then press button (4). Use keys (1) and (2) to select the ABS indicator, then press button (4) to access the setup page. Now, always using buttons (1) and (2), you can increase or decrease ABS level; press button (4) to confirm the new level. The different settings are 01, 02 and OFF. will be automatically highlighted; press button (4) to quit this page and go back to the setting menu. Note If ABS OFF is selected and stored, Ducati recommends paying the utmost attention while riding and braking your bike. Note If on DEFAULT lettering right side a symbol is displayed, this means that the default setup is active, namely that the parameters shown are those set up by Ducati. Note If OFF is set, the ABS will be disabled and the corresponding ABS warning light will start flashing. Once the new setup is selected, press button (4). The instrument panel will automatically highlight the "MEMORY" indicator; to store the new setup, keep button (4) pressed for 3 seconds. After this time, the instrument panel will display the "MEMORIZED" indicator for 2 seconds as a confirmation of the change made. The "EXIT" indicator 81