2014 Ducati Hypermotard Hyperstrada Owners Manual - Page 183
2014 Ducati Hypermotard Hyperstrada Manual
Page 183 highlights
Main maintenance operations Check and top up the coolant level Check the coolant level in the expansion reservoir on the right-hand side of the headstock. Steer the handlebar completely to the left and check that the level is between the MIN and MAX marks on the side of the expansion reservoir. Top up if the level is below the MIN mark. Unscrew the filler plug (1) and add ENI Agip Permanent Spezial antifreeze (do not dilute, use pure), until reaching the MAX level. Refit the plug (1). This type of mixture ensures the best operating conditions (the coolant starts to freeze at -4 °F/-20 °C). 1 MAX MIN Fig 134 Cooling circuit capacity: 0.61 gal (2.3 cu. dm - liters). Attention Make sure the engine is cold before proceeding. Attempting to change the coolant with the engine hot could lead to burns from hot coolant or scalding steam. 181