2010 Mazda MAZDA3 Owner's Manual - Page 202

Driving Your Mazda Warning/Indicator Lights and Beep Sounds If the light stays on, the TCS or DSC may have a malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer. The following conditions could indicate that the system is malfunctioning. If one of the following conditions occurs, consult an Authorized Mazda Dealer. l The AFS OFF indicator light does not illuminate even though the ignition is switched ON. l The AFS OFF indicator light flashes continuously. NOTE l qDSC OFF Indicator Light í This indicator light stays on for a few seconds when the ignition is switched ON. It also illuminates when the DSC OFF switch is pressed and TCS/DSC is switched off (page 5-27). If the light stays on when the TCS/DSC is not switched off, take your vehicle to an Authorized Mazda Dealer. The dynamic stability control may have a malfunction. The system will not operate if the battery has been disconnected or a fuse has been replaced. The AFS indicator light flashes under any of these conditions. To restore the AFS function, do the following operation. 1. Switch the ignition ON. 2. Turn the steering wheel completely to the right, and then completely to the left. 3. Switch the ignition to off (LOCK) or ACC, and then back to ON. 4. Make sure the indicator light turns off. If the indicator light remains illuminated after the ignition is switched ON again, consult an Authorized Mazda Dealer. l qAFS OFF Indicator Light í The AFS OFF indicator light illuminates briefly when the ignition is switched ON, and then turns off. Pressing the AFS OFF switch cancels the AFS function and illuminates the indicator light. Even if the AFS is not operating due to some malfunction, the normal headlight function is still operable. qCruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green) í The indicator light has two colors. 5-52 í Some models.