2010 Mazda MAZDA3 Owner's Manual - Page 403

Maintenance and Care Owner Maintenance 2. Remove the cover. 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconnect the bulb from the socket. 4. Disconnect the bulb from the socket. 5. Install the new bulb in the reverse order of removal. (5 Door) 5. Install the new bulb in the reverse order of removal. High-mount brake light (4 Door) 1. Make sure the ignition is switched off, and the headlight switch is off. 2. Pull the center of each plastic retainer and remove the retainers and the trunk end trim. Removal 1. Make sure the ignition is switched off, and the headlight switch is off. 2. Remove the liftgate upper trim. Installation 3. Disconnect the electrical connector from the socket. 4. Turn the socket and bulb assembly counterclockwise and remove it. 3. Turn the socket and bulb assembly counterclockwise and remove it. 8-45