2010 Mazda MAZDA3 Owner's Manual - Page 289

Interior Comfort Bluetooth Audio 2. Turn on the Bluetooth audio device's power. Make sure that the " " symbol is displayed in the information display. The symbol is not displayed if an unprogrammed Bluetooth audio device is being used or the vehicle's Bluetooth unit has a malfunction. NOTE Some Bluetooth audio devices need a certain amount of time before the " " symbol is displayed. Selecting a file (track) Short-press the track down button ( ) or turn the file dial counterclockwise: Selects the beginning of the current file (track). Short-press the track up button ( ) or turn the file dial clockwise: Selects the next file (track). 3. Press the AUX button to switch the Bluetooth audio mode to "BT Audio". 4. The audio recorded to the Bluetooth audio device begins playback. NOTE l l l If the Bluetooth audio device does not begin playback, press the Play/Pause button ( ). If the mode is switched from Bluetooth audio mode to another mode (radio mode), audio playback from the Bluetooth audio device stops. If a call is received on a hands-free mobile phone during playback from the Bluetooth audio device, the playback is stopped. Playback from the Bluetooth audio device resumes after the call ends. Playback 1. To listen to a Bluetooth audio device over the vehicle's speaker system, switch the mode to Bluetooth audio mode. (Refer to "Switching to Bluetooth audio mode") 2. To stop playback, press the Play/Pause button ( ). 3. Press the button again to resume playback. 6-71