2010 Mazda MAZDA3 Owner's Manual - Page 399
2010 Mazda MAZDA3 Manual
Page 399 highlights
Maintenance and Care Owner Maintenance 3. Turn the center section of the plastic retainer counterclockwise and remove the retainers and partially peel back the mudguard. Removal 2. Turn the screw counterclockwise and remove it and then partially peel back the mudguard. Installation 4. Turn the socket and bulb assembly counterclockwise and remove it. 5. Disconnect the bulb from the socket. 3. Disconnect the electrical connector from the bulb by pressing the tab on the connector with your finger and pulling the connector downward. 4. Turn the socket and bulb assembly to remove it. Carefully remove the bulb from its socket in the reflector by gently pulling it straight back out of the socket. 6. Install the new bulb in the reverse order of the removal procedure. Replacing a Fog Light Bulbs í 1. Make sure the ignition is switched off, and the headlight switch is off. 5. Install the new bulb in the reverse order of removal. í Some models. 8-41