2010 Mazda MAZDA3 Owner's Manual - Page 398

Maintenance and Care Owner Maintenance 2. Disconnect the electrical connector from the bulb by pressing the tab on the connector with your finger and pulling the connector downward. 3. Turn the socket and bulb assembly to remove it. Carefully remove the bulb from its socket in the reflector by gently pulling it straight backward out of the socket. 3. Turn the socket and bulb assembly to remove it. Carefully remove the bulb from its socket in the reflector by gently pulling it straight backward out of the socket. 4. Install the new bulb in the reverse order of the removal procedure. Parking lights/Front turn signal lights/ Front side-marker lights 4. Install the new bulb in the reverse order of the removal procedure. Low-beam bulbs 1. Make sure the ignition is switched off, and the headlight switch is off. 2. Disconnect the electrical connector from the bulb by pressing the tab on the connector with your finger and pulling the connector downward. 1. Make sure the ignition switch is turned off and the headlight switch is off. 2. If you are changing the right bulb, start the engine, turn the steering wheel all the way to the left, and turn off engine. If you are changing the left bulb, turn the steering wheel to the right. 8-40