2010 Mercedes R-Class Owner's Manual - Page 102
2010 Mercedes R-Class Manual
Page 102 highlights
251_AKB; 4; 52, en-US d2ureepe, 2009-03-23T09:22:52+01:00 - Seite 100 Version: 2.11.8.1 100 Lighting G Warning! Combination switch Controls in detail In low ambient lighting or foggy conditions, only switch from position à to L with the vehicle at a standstill in a safe location. Switching from à to L will briefly switch off the headlamps. Doing so while driving in low ambient lighting conditions may result in an accident. Fog lamps will operate with the parking lamps and/or the low-beam headlamps on. Fog lamps should only be used in conjunction with low-beam headlamps. Consult your State or Province Motor Vehicle Regulations regarding permissible lamp operation. X Switch on the ignition. X Turn the exterior lamp switch to position T or L (Y page 97). X Switching on front fog lamps: Pull out the exterior lamp switch to first stop. The green indicator lamp N in the exterior lamp switch comes on. X Switching on rear fog lamp: Pull out the exterior lamp switch to second stop. The rear fog lamp, the front fog lamps, the green and the yellow indicator lamp R in the exterior lamp switch come on. X Switching off front fog lamps/rear fog lamp: Push in the exterior lamp switch to its stop. Turn signals X Press the combination switch in direction of arrow ; or ?. The corresponding turn signal indicator lamp ! or # in the instrument cluster flashes. The combination switch resets automatically after major steering wheel movements. i To signal minor directional changes such as changing lanes, press the combination switch only to point of resistance and release. The corresponding turn signal lamps will flash three times. High beam X Locator lighting and night security illumination Locator lighting and night security illumination are described in the "Control system" section, see "Switching locator lighting on or off" (Y page 135) and "Switching night security illumination (Headlamps delayed shut-off feature) on or off" (Y page 135). Turn the exterior lamp switch to position L (Y page 97). X Switching on: Push the combination switch in direction of arrow :. The high-beam headlamp indicator lamp K in the instrument cluster comes on. X Switching off: Pull the combination switch in direction of arrow = to its original position. i Also note the information on high-beam headlamps with activated automatic headlamp mode (Y page 98) or the daytime running lamp mode (Y page 99).