2010 Mercedes R-Class Owner's Manual - Page 209

251_AKB; 4; 52, en-US d2ureepe, 2009-03-23T09:22:52+01:00 - Seite 207 Version: 2.11.8.1 Useful features X RThe 207 Start the engine. temperature of the DC/AC inverter is temporarily too high. X Pull the plug of the small device out of 115V AC socket : and plug it in again after waiting a few minutes. The 115V AC socket : provides an alternating current of 115 volts, which enables you to connect small electrical devices with a combined received power of 150 W at most. You can connect small devices such as game consoles, mobile phone chargers, laptops, etc. Prerequisites for operation: RThe If LED ; still does not come on, contact an authorized Mercedes-Benz Center. Tele Aid ! In order to activate the Tele Aid system, a subscriber agreement must be completed. To ensure your system is activated and operational, please press Information button E to perform the acquaintance call. Failure to complete either of these steps may result in a system that is not activated. If you have any questions regarding activation, please call the Response Center at 1-800-756-9018 (in the USA) or 1-888-923-8367 (in Canada). Shortly after the completion of your Tele Aid acquaintance call, you will receive a user ID and password in the mail. You may use this password to access the Tele Aid section in "Owner's Online" at www.mbusa.com (USA only). The "My Tele Aid" section will give you access to account information, remote door unlock and more. The Tele Aid system is available if Rit has been activated and is operational. Activation requires a subscription for 12V power outlets in the second-row footwell and cargo compartment (Y page 206) are operational. plug of the small device must be inserted fully into 115V AC socket :. the permissible voltage range. RThe RThe on-board voltage of the vehicle is within RThe specified wattage of the small device is identical or lower than the maximum permissible wattage (150 W) of the 115V AC socket :. X Operation: Open cover =. Insert the plug of the small device into 115V AC socket :. LED ; comes on. If LED ; does not come on, refer to the section on possible nonoperation causes. X Switching off: Pull the plug out of 115V AC socket :. Do not pull on the cable. X Close cover =. Possible nonoperation causes: X RThe on-board voltage of the vehicle is not within the permissible voltage range. Z Controls in detail RSome small devices have a continuous power rating of less than 150 W but a very high switch-on current. Such devices will not operate. When connecting such a device, 115V AC socket : will not provide power.