2010 Mercedes R-Class Owner's Manual - Page 328
2010 Mercedes R-Class Manual
Page 328 highlights
251_AKB; 4; 52, en-US d2ureepe, 2009-03-23T09:22:52+01:00 - Seite 326 Version: 2.11.8.1 326 Flat tire X Practical hints On the wheel to be changed, loosen but do not yet remove the wheel bolts (approximately one full turn with wheel wrench :). X Assemble the jack (Y page 272). X Attach reversible ratchet ? to jack = in such a way that the word UP can be seen. X Place jack = on firm ground. X Position jack = under take-up bracket ; so that it is always vertical as seen from the side, even if the vehicle is parked on an incline. The jack take-up brackets are located directly behind the front wheel housings and in front of the rear wheel housings. G Warning! X The jack is designed exclusively for jacking up the vehicle at the jack take-up brackets. Make sure the jack arm is fully seated in the jack take-up bracket. If you do not position the jack correctly in the jack take-up bracket, the vehicle can fall off the jack and seriously or fatally injure you or others. Turn ratchet ? up and down until jack = is fully seated in take-up bracket ; and the jack base evenly meets the ground. X Jack up the vehicle until the wheel is a maximum of 1.2 in (3 cm) from the ground. ! Do not position the jack on the body of the vehicle, as this may cause damage to the vehicle.