2010 Mercedes R-Class Owner's Manual - Page 99

251_AKB; 4; 52, en-US d2ureepe, 2009-03-23T09:22:52+01:00 - Seite 97 Version: 2.11.8.1 Lighting Each memory position button on the driver's side can store all of the following settings: RSeat 97 position wheel position rear view mirrors' position driver's side, also wait for the steering wheel and exterior rear view mirrors to move to the stored position. RSteering RExterior Do not activate the memory function while driving. Activating the memory function while driving could cause the driver to lose control of the vehicle. Lighting Notes i If you drive in countries with left-hand driving, you must have the headlamps modified for symmetrical low beams. Relevant information can be obtained at any authorized Mercedes-Benz Center. i Vehicles equipped with active Bi-Xenon headlamps: The active Bi-Xenon headlamps increase usable illumination over conventional headlamps because they follow the curvature of the road ahead. The beams of the active Bi-Xenon headlamps shift to either side according to the vehicle's steering angle and speed. Each memory position button on the front passenger side can store the setting of the seat position. Storing positions into memory X Exterior lamp switch Adjust the seats. X On the driver's side, also adjust the steering wheel and exterior rear view mirrors to the desired positions. X Press memory button M once and within 3 seconds press memory position button 1, 2 or 3. When the settings are stored to the selected position, an acknowledgement signal sounds. 1 W Standing lamps, left Recalling positions from memory X 2 X Standing lamps, right 3 $ Off Press and hold desired memory position button 1, 2 or 3 until the seat has moved to the stored position completely. On the Daytime running lamp mode 4 Ã Automatic headlamp mode Daytime running lamp mode Z Controls in detail G Warning! i Releasing the memory position button stops movement to the stored positions immediately.