2010 Mercedes R-Class Owner's Manual - Page 132

251_AKB; 4; 52, en-US d2ureepe, 2009-03-23T09:22:52+01:00 - Seite 130 Version: 2.11.8.1 130 Control system Vehicle status message memory menu Use the Vehicle status message memory menu to scan malfunction and warning messages that may be stored in the memory. Such messages appear in the multifunction display and are based on conditions or system status the vehicle's system has recorded. The Vehicle status message memory menu only appears if messages have been stored. For malfunction and warning messages, see "Vehicle status messages in the multifunction display" (Y page 274). G Warning! Malfunction and warning messages are only indicated for certain systems and are intentionally not very detailed. The malfunction and warning messages are simply a reminder with respect to the operation of certain systems. They do not replace the owner's and/or driver's responsibility to maintain the vehicle's operating safety. Have all required maintenance and safety checks performed on the vehicle. Bring the vehicle to an authorized Mercedes-Benz Center to address the malfunction and warning messages. X i After you have scrolled through all recorded status messages, the first recorded message appears again. Should the vehicle's system record any conditions while driving, the number of messages will reappear in the multifunction display when the SmartKey in the starter switch is turned to position 0 or removed from the starter switch. With KEYLESS-GO, the number of messages will reappear when you turn off the engine by pressing the KEYLESS-GO start/stop button and open the driver's door. Except for high-priority messages, the vehicle status message memory will be cleared when you switch off the ignition. Settings menu Introduction In the Settings menu there are two functions: The function To reset, press reset button for 3 seconds, with which you can reset all the settings to the original factory settings and a collection of submenus with which you can make individual settings for your vehicle. The following settings and submenus are available in the Settings menu: RResetting to factory settings (Y page 131) RSubmenus Controls in detail Press button V or U repeatedly until the Vehicle status message memory menu appears in the multifunction display. If conditions have occurred causing status messages to be recorded, the number of messages appears in the multifunction display. in the Settings menu (Y page 131) cluster submenu (Y page 132) submenu (Y page 133) submenu (Y page 134) submenu (Y page 137) RInstrument X Press button & or *. The stored messages will now be displayed in the order in which they have occurred. RTime/Date RLighting RVehicle submenu (Y page 137) RComfort