2010 Mercedes R-Class Owner's Manual - Page 140
2010 Mercedes R-Class Manual
Page 140 highlights
251_AKB; 4; 52, en-US d2ureepe, 2009-03-23T09:22:52+01:00 - Seite 138 Version: 2.11.8.1 138 Control system Switching fold-in function for exterior rear view mirrors on or off Use this function to set the exterior rear view mirrors to be folded in automatically when you lock your vehicle. With this function set to On and the exterior rear view mirrors folded in using the button on the door control panel (Y page 95), the exterior rear view mirrors will not fold out when you switch on the ignition. You will then have to fold out the exterior rear view mirrors using the button on the door control panel (Y page 95). Make sure both exterior rear view mirrors are folded out completely before driving off. X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button &. X Move the selection marker with button W or X to the Comfort submenu. X Press button & or * repeatedly until the message Fold In Mirrors When Locking appears in the multifunction display. The selection marker is on the current setting. Controls in detail X Press button W or X to activate (On) or deactivate (Off) the easy-entry/exit feature. Activating/deactivating seat belt adjustment feature Use this feature to set the seat belts to be adjusted automatically with the driver's or front passenger seat belt fastened and the starter switch in position 2. For more information on the seat belt adjustment feature, see (Y page 51). X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button &. X Move the selection marker with button W or X to the Comfort submenu. X Press button & or * repeatedly until the message Belt Adjustment appears in the multifunction display. The selection marker is on the current setting. X Press button W or X to switch the function On or Off. X Press button W or X to active (On) or deactivate (Off) the seat belt adjustment feature. Distance warning function In vehicles equipped with Distronic, you can determine whether the distance warning function is to be enabled or disabled. With this function set to On, the system will alert you when recognizing a stationary obstacle or a