2010 Mercedes R-Class Owner's Manual - Page 109
2010 Mercedes R-Class Manual
Page 109 highlights
251_AKB; 4; 52, en-US d2ureepe, 2009-03-23T09:22:52+01:00 - Seite 107 Version: 2.11.8.1 Power windows If the door window is blocked again and opens slightly: X 107 G Warning! Door windows X X Switch on the ignition. Opening/closing: Press or pull and hold switch : to ? to the resistance point. The corresponding window moves downward or upward until you release the switch. Pulling and holding the switch to close the door window immediately after it had been blocked two times will cause the door window to close without any reversal function for as long as you hold the switch. Hinged quarter windows X X X Express operation: Press or pull switch : to ? past the resistance point and release. The corresponding window opens or closes completely. X Stopping during express operation: Press or pull the respective switch again. Closing when a door window is blocked Switch on the ignition. Opening: Press switch A and release. Both hinged quarter windows open completely. X Closing: Pull switch A and release. Both hinged quarter windows close completely. G Warning! Make sure that nobody can become trapped and be seriously or even fatally injured when closing a door window with greater force or without automatic reversal function. If the upward movement of a door window is blocked during the closing procedure, the door window will stop and open slightly. X i When the obstruction sensor detects that a hinged quarter windows is blocked during the closing process, they will stop and open slightly. X Halting closing process: Press or pull switch A once more during the closing process. The hinged quarter windows will stop and open completely. i For your safety, the hinged quarter windows cannot be opened again until 4 seconds have passed. Synchronizing door windows The door windows must be synchronized after the battery has been disconnected or if the door windows cannot be fully closed (express operation). Z Immediately after the door window has stopped because it was blocked, pull and hold the respective switch upward until the door window is fully closed. The door window closes with greater force. Controls in detail Immediately after the door window was blocked, pull and hold the respective switch upward until the door window is fully closed. The door window closes without automatic reversal function.