2010 Mercedes R-Class Owner's Manual - Page 133

251_AKB; 4; 52, en-US d2ureepe, 2009-03-23T09:22:52+01:00 - Seite 131 Version: 2.11.8.1 Control system Resetting to factory settings You can reset the settings of all submenus to the factory settings. For safety reasons, the function Lamp Circuit Headlamp in the Lighting submenu cannot be reset while driving. The following message appears in the multifunction display: Settings Cannot be completely reset to factory settings when engine is running. X Press button V or U repeatedly until the Settings menu appears in the multifunction display. 131 Submenus in the Settings menu X X X Press the reset button in the instrument cluster (Y page 122) for approximately 3 seconds. Press the reset button once more. The settings you have changed will not be reset unless you confirm the action by pressing the reset button a second time. After approximately 5 seconds, the Settings menu reappears in the multifunction display. X Press button X. The selection marker moves to the next submenu. X Scroll down with button X, scroll up with button W. X With the selection marker on the desired submenu, use button & to access the individual functions within that submenu. X Once within the submenu, use button & to move to the next function or button * to move to the previous function within that submenu. X Use button W or X to change the settings of the respective function. The following lists show what settings can be changed within the various menus. Detailed instructions on making individual settings can be found on the following pages. Instrument cluster submenu RSelecting speedometer/odometer display mode (Y page 132) (Canada only) RSelecting digital speedometer display mode (Y page 132) Z Controls in detail Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button &. The collection of the submenus appears in the multifunction display. There are more submenus than can be displayed simultaneously.